What are the methods of bearing maintenance of roll plate bending machine?
The plate bending machine is a kind of equipment that uses work rolls to bend and form sheet materials. It can form parts of different shapes such as cylindrical parts and conical parts. It is a much important processing equipment.
1. Three-roll plate bending machine: includes symmetrical type, symmetrical hydraulic type, upper roller type, symmetrical type, horizontal down method, inclined down method, arc down method and vertical down method, etc.
2. Four-roll plate bending machine: divided into 4 roller bending machine with side-roll inclination adjustment, d-roll rolling machine with side-roll arc adjustment, and NC four-roll rolling machine.
3. Special-purpose plate bending machine: there are vertical plate rolling type, marine plate rolling type, double-roll plate rolling type, cone rolling plate type, multi-roll plate rolling type and multi-purpose plate rolling type, etc.
As the much important part of the roll plate bending machine, such as the three roller pipe bending machine, the bearing plays a very significant role in the normal use of the equipment, and the quality of the bearing will seriously affect the rolling effect. The correct maintenance methods of the bearing as follows:
1. First of all, special tools need to be used during installation, and the use of some cloth and short fibers should be avoided as much as possible; and being much careful for installation is required, and the strong stamping must be avoided. At the same time, it is necessary to avoid directly hitting the bearing with a hammer, and it is not allowed to transmit pressure through the rolling elements to affect the bearing;
2. it is necessary to ensure that the bearing and the surrounding environment are clean. Because even if some very fine dust enters the bearing, it will increase the wear, vibration and noise of the bearing of the cnc plate rolling machine;
3. In order to prevent the bearing from rusting, it is generally possible to take the bearing directly by hand, but it should be noted that when taking it, the sweat on the hand needs to be washed, and a good mineral oil needs to be applied before the operation, especially It is necessary to pay extra attention to rust prevention during the rainy season and summer;
4. Because the bearing is a very important part, it is necessary to be more cautious when using it. It is necessary to avoid strong stamping during installation. At the same time, it is not allowed to hit the bearing with a hammer to avoid some irreversible damage to the bearing.
In the bearing maintenance method of the roll plate bending machine, it is especially necessary to pay attention to avoid rusting, and it is also necessary to avoid operations that cause damage to the bearing as much as possible when using it.
