The working capacity of the CNC plate rolling machine refers to the ability of the plate to wind the thickness and width of a larger plate with a specified yield limit in a cold state. There are many methods of using cold coils. The cold roll has high precision, simple operation process and low cost. However, the quality of the sheet is high, and defects such as gaps and cracks are not allowed.
The upper roller is at the center of the two lower rollers at a symmetrical position. The hydraulic oil in the hydraulic cylinder acts on the piston to move vertically, and the final gear of the main reducer drives the gears of the two lower rollers to mesh for rotational movement to provide torque for the rolled plate. The 4 roll plate bending machine is suitable for the bending and forming of metal plates. It can roll round, arc and tapered workpieces within a certain range, and has the function of pre-bending the end of the plate. The remaining straight edges are small and the work efficiency is high. And the metal sheet can be roughly leveled on this machine.
1. The cnc plate rolling machine must be managed by a dedicated person.
2. The operator must be familiar with the structure, performance and use of the CNC plate rolling machine, and can only operate after the approval of the responsible manager.
3. Check carefully whether the safety device is in good condition before starting the machine.
4. During operation, it is strictly forbidden to put hands and feet on the rollers, transmission parts and workpieces.
5. After work is interrupted, the clutch should be turned to neutral.
6. Multi-person collaborative work must be directed by a dedicated person.
7. It is strictly forbidden to overload the CNC plate rolling machine.
8. The tilting reset of the lifting and turning bearing of the upper roller and the balance of the upper roller must be carried out after the main drive is stopped.
9. It is forbidden to pile up workpieces and sundries in the workplace, so as to keep the machine tool and the site clean at all times.
10. After the operation is completed, the power supply should be cut off and the power supply box should be locked.
As industrial production has gradually moved towards high-end intelligence in recent years, since the second half of last year, the wind direction of the coiling machine market has begun to undergo some changes. The most important point is that the growth rate of high-end coiling machines exceeds that of low-end coiling machines for the first time. The market started from price competition to more intense brand competition. This metal fabrication equipment is developing in the direction of high speed, precision, intelligence and green.
The advancement and development of CNC plate rolling machine skills provide good conditions for the development of modern manufacturing, and promote the development of manufacturing in the direction of high efficiency, high quality and humanity. It can be foreseen that with the diversification of CNC plate bending machine skills and the wide application of CNC plate bending machines, the manufacturing industry will usher in a profound innovation that can shake the traditional model.
